but went with the 375 Stalker instead. The 375 flopped and the 8.6 prospered.
The 375 Stalker is the same 308 case cut to 1.560" and necked to .375". I built mine on the AR15 platform as it uses a 7.62 x 39 bolt and standard AR15 magazines loaded single stack. I run 270 grain cast powder coated bullets @ 1060 fps with a suppressor. I can run 220 grain Hornady's up to 2200 fps.
I built mine in 2021 and haven't really done much with it. I need to get it back out
-
I figure Kase has researched the topic maybe GNR
- WB, 2024-04-19, 09:45
-
I looked at the 8.6 when it came out,
- Randy Barnett, 2024-04-19, 10:41
-
I wonder if a cast bullet could take 1:3 rifling?! (nm)
- WB, 2024-04-19, 10:52
-
I'm not sure.
- Randy Barnett, 2024-04-19, 10:56
-
That’s the secret it seems, Uber high rpm
- WB, 2024-04-19, 11:48
-
A fast twist uses up a lot of energy.
- Jim Taylor, 2024-04-19, 12:19
-
Lots of interesting testing being done.
- WB, 2024-04-19, 13:05
-
8.6
- Brian T, 2024-04-19, 13:49
-
Is your TC barrel that crazy fast twist? (nm)
- WB, 2024-04-19, 14:41
-
8.6
- Brian T, 2024-04-19, 16:04
- I know you have good experience with the solid bullets - WB, 2024-04-19, 19:11
-
8.6
- Brian T, 2024-04-19, 16:04
-
Is your TC barrel that crazy fast twist? (nm)
- WB, 2024-04-19, 14:41
-
8.6
- Brian T, 2024-04-19, 13:49
-
Lots of interesting testing being done.
- WB, 2024-04-19, 13:05
-
A fast twist uses up a lot of energy.
- Jim Taylor, 2024-04-19, 12:19
-
That’s the secret it seems, Uber high rpm
- WB, 2024-04-19, 11:48
-
I'm not sure.
- Randy Barnett, 2024-04-19, 10:56
-
I wonder if a cast bullet could take 1:3 rifling?! (nm)
- WB, 2024-04-19, 10:52
-
I looked at the 8.6 when it came out,
- Randy Barnett, 2024-04-19, 10:41