matter where I put those little #8 shot it still covers the nose with lube. I even filled all the holes up and it still puts lube all over the nose of the bullet. I have run the length of sizing up and down and no change. I have the full machine with several sizing dies. I set the little video on a laptop next to the damn thing and go exactly as they do and get lube all over the nose, no matter what. I order the sizer dies by the bullet I am sizing so they should set the dies to the right setting instead of having to watch the little video every time you touch the damn thing. It is now residing under my bench and I hope the mice have eaten it.
-
510 gnr bullet diameter
- jack s, 2017-01-30, 15:10
![[*]](themes/default/images/complete_thread.png "Open whole thread")
-
My mould drops about .515, Lyman makes a .512"
- WB, 2017-01-30, 15:21
-
WB.. do you size many lead projos?
- JamesA, 2017-01-30, 18:57
-
My distain for the Lyman 450 is legendary.
- WB, 2017-01-30, 19:20
-
I have a Star that Colleen got me for Christmas and no
- Gary Reeder, 2017-01-30, 19:53
- I think the base of the bullet goes first - Harry, 2017-01-30, 23:15
-
Poor machine
- JamesA, 2017-01-30, 20:20
- you are a better man than me Charlie Brown (nm) - Gary Reeder, 2017-01-30, 21:48
- You have an open invitation - JamesA, 2017-01-30, 19:46
-
I have a Star that Colleen got me for Christmas and no
- Gary Reeder, 2017-01-30, 19:53
-
My distain for the Lyman 450 is legendary.
- WB, 2017-01-30, 19:20
- Same here size to .510 I also - Jk, 2017-01-30, 16:42
-
WB.. do you size many lead projos?
- JamesA, 2017-01-30, 18:57
-
My mould drops about .515, Lyman makes a .512"
- WB, 2017-01-30, 15:21