time for the Saturday sale. A lot of sale items today

Gary Reeder
[subject]
Saturday, October 19, 2019, 11:27 (2504 days ago)

We have several really neat things today and everything is priced right at my cost. If you see anything you are interested in, call Noodle at 928-527-4100 immediately, then after you talk to him and secure the item, post it on the site here that it is sold. All items are plus shipping.

First I have an Ultimate 41. This beauty is for the hunter that doesn't need a lot of flash and engraving. It is chambered in 41 GNR and has a 6" barrel with the interchangeable blade front sight and the gold bead. The 41 GNR is a very powerful cartridge but has mild recoil. I have taken Bison, Water Buffalo and the like with the 41 GNR and most with one shot. And it is super simple to load. It is finished in our satin Vapor Honed Black Chromex for no shine. It has the Gunfighter Grip with a nice set of contrasting Ukrainian grips made and fit to it. It has the Positive performance Package and is very smooth and accurate. It has satin stainless small parts including the Belt Mountain base pin for a tighter lock up. The gun would normally run $1895 but is sale priced at $1095.
[image]
[image]
[image]
[image]
[image]

Next I have a very special gun. One of our very popular Trail Guns. This beauty is chambered in 44-40 with a 5" barrel. It is a two toned gun with some parts a satin Vapor Honed stainless and the rest our Black Chromex. The gun has had the Positive Performance Package and is very accurate. It has our Magnum gripframe and a set of perfectly fitting black Corian grips. Like all our custom revolvers it has our .002 barrel/cylinder gap for less power loss. It has the interchangeable blade front sight with the gold bead. It would normally run $1895 but is sale priced at $1095.
[image]
[image]
[image]
[image]
[image]

Next I have the perfect woods gun and also the perfect gun to convert to one of our Falcon series of cartridges based on the 30-30 case or just run it out to the 30 GNR for considerably more power. The gun is the Savage 340 and is chambered in 30-30. We had set the gun back to convert it to one of the Falcons but are just too far behind to do so. So we decided to offer it to you. The gun is in very good condition and is ready to go. These guns are fairly rare and sought after for custom conversions. We have it priced at $295.
[image]
[image]
[image]
[image]
[image]
[image]

Next I have our Montana Hunter chambered in 356 GNR. The 356 GNR is a very powerful cartridge and has taken cow elk, Nilgai and like size animals with ease. It is finished in our satin Vapor Honed Black Chromex with contrasting satin stainless small parts, including the Belt Mountain Base Pin for added accuracy. The gun has a 6" barrel with the interchangeable blade front sight and gold bead. It has had the Positive Performance Package and is very smooth and accurate. It has the Gunfighter Grip with a real nice set of satin black Corian grips. This is the perfect hunting revolver for the lower 48 and would take cow elk size critters with ease, but without a lot of recoil. The gun was on here last week but didn't sell so I have dropped the price to $1095.
[image]
[image]
[image]
[image]
[image]
[image]
[image]

Next is a very special gun. It is one of our African Classic rifles and is based on the Ruger #1. It is chambered in 470 Nitro, the perfect large dangerous game rifle. If you have ever thought of going to Africa or Alaska for big game, this is the rifle for you. The 470 Nitro is one of the most popular cartridges among the Professional Hunters in Africa. This beauty is full custom from the ground up. It has a 20" barrel plus one of our muzzle brakes which helps keep the recoil easily manageable. It also has the Decelerator pad for more shooting comfort. It has real nice wood like the early #1s had. The rifle is finished in our deluxe Black Chromex finish with gold highlights and has big 5 animal engraving on the barrel and frame. It has the express rear sight with the barrel band front sight with the gold bead. It has a nice action job and is very accurate. The African Classic is normally $2495 on the customer's base gun. With us furnishing the base gun it would normally be priced a bit over $3200. It is sale priced at $1895.
[image]
[image]
[image]
[image]
[image]
[image]
[image]
[image]
[image]

Next we have one of our Bad Medicine revolvers. This one is chambered in 41 GNR with a 6" barrel. It has dangerous game scenes engraved on it and is finished in a soft satin Vapor Honed stainless finish. It has fire blue small parts including the Belt Mountain base pin for better accuracy. It has blue and black laminated grips on the Bisley Gunfighter Grip. It has had the Positive Performance package done to it and is very smooth and accurate. It has the interchangeable blade front sight system with gold bead blade. The 41 GNR will and has taken just about every animal in the lower 48. It would normally run around $1900 but is sale priced at $1095.
[image]
[image]
[image]
[image]
[image]
[image]

Next I have something special. This one is a real beauty. If you have ever wanted a Bar-B-Q gun to show off, this is it. And it is accurate too. It is our full custom EL DIABLO, in 45 Long Colt. The gun is full engraved, high polished stainless with contrasting Fire Blue small parts, plus it has had the Positive Performance Package done to it. Very smooth and accurate too. It has the Gunfighter Grip with a really nice set of green and grey laminated grips made and fit to it. The gun with these special features would normally run around $2000. It is sale priced at $1295.
[image]
[image]
[image]
[image]
[image]
[image]
[image]

next I have something special for you black powder shooters. It is the Thompson Center Hawken in 50 caliber. The gun is in very good condition with a few tiny scratches from being hunted with. Other than that is in very good condition. Due to being not made anymore they are going fairly high on the internet, usually in the $400 to $500 range. This beauty is sale priced at $295.

[image]
[image]
[image]
[image]
[image]
[image]
[image]
[image]

Next I have several custom TC barrels. I have Contender barrels and one Encore barrel. The barrels that do not have muzzle brakes on them are priced at $155. The barrels that have brakes on them are marked *** and are $165.
Contender barrels
6.5 Raptor..stainless 12"
256 GNR..stainless..11"
240 Raptor...stainless..12"
338 GNR... stainless..15"***
7 GNR...blue...14"***

One encore barrel
378 GNR...blue..15"***

I also have our dies sale priced. Hornady took a big jump in price recently but our custom caliber dies are still sale priced. They retail for $240 but are sale priced at $90.


Finally I have our Flattop Tools. These convert a standard round nose 22 LR round into the power of a 22 Magnum. In the pic the small hole is the standard 22 LR. The large hole is from the same box but after being run thru the Flattop Tool. These are normally $75 but are sale priced at $50.
[image]
[image]

SHOCKER...I sucked up that 44-40 Trail Gun...

Huey
[subject]
Saturday, October 19, 2019, 11:32 (2504 days ago) @ Gary Reeder

Sure the Misfits are simply stunned...

I looked right passed it knowing it was gone

Amede
[subject]
Saturday, October 19, 2019, 11:42 (2504 days ago) @ Huey

to you already.

BTW, this one is Reeder Revolver #28...

Huey
[subject]
Saturday, October 19, 2019, 11:51 (2504 days ago) @ Amede

I've spent a lot of years proving the old hyphenated cartridges still work. This will help in my efforts.

My next three custom builds from Gary will be 38-40s.

Nice revolver, good for you Huey.

Woody
[subject]
Saturday, October 19, 2019, 12:16 (2504 days ago) @ Huey

- No text -

Huey nice one.

Sid R
[subject]
Saturday, October 19, 2019, 18:57 (2504 days ago) @ Woody

I'll get one some day.

How many TGs?

ChrisG
[subject]
Saturday, October 19, 2019, 11:50 (2504 days ago) @ Huey

- No text -

This makes 10...

Huey
[subject]
Saturday, October 19, 2019, 11:51 (2504 days ago) @ ChrisG

- No text -

A really great looking roscoe. Great companion to a levergun

Patrick McCann
[subject]
Saturday, October 19, 2019, 15:45 (2504 days ago) @ Huey

- No text -

I forgot one. I have a custom G-2 frame. Stainless with game

Gary Reeder
[subject]
Saturday, October 19, 2019, 12:11 (2504 days ago) @ Gary Reeder

scenes on the sides and tracks on the ribbon. It is all stainless and has had a full action job. Normally $795 is is sale priced at $475 and I only have one left. [image]
[image]

as usual the sale runs thru midday Monday

gary reeder
[subject]
Saturday, October 19, 2019, 19:16 (2504 days ago) @ Gary Reeder

- No text -

being the shop is closed, if you see something you want,

gary reeder
[subject]
Saturday, October 19, 2019, 19:20 (2504 days ago) @ gary reeder

post it on here and get with us Monday morning.

Saturday Sale

Ken Patton
[subject]
Saturday, October 19, 2019, 21:51 (2503 days ago) @ Gary Reeder

I'll take the G2 frame, the 240 Raptor Barrel and a set of 240 Raptor dies. Will call Monday.

That will make a nice set-up. Good grab.

Woody
[subject]
Sunday, October 20, 2019, 08:55 (2503 days ago) @ Ken Patton

- No text -

240 Raptor

Ken Patton
[subject]
Sunday, October 20, 2019, 19:26 (2503 days ago) @ Woody

It will be my new Antelope gun

30-30

Dan Corbin
[subject]
Sunday, October 20, 2019, 18:09 (2503 days ago) @ Gary Reeder

ill take the savage 30-30. ill call in monday.

thanks Dan. I have Noodle holding it for you.

Gary Reeder
[subject]
Monday, October 21, 2019, 13:19 (2502 days ago) @ Dan Corbin

- No text -

powered by my little forum