Reeder Custom Guns - Not sure about powder coating for PP bullets but

Sean Harper
Not sure about powder coating for PP bullets but
Thursday, October 24, 2019, 05:45

powder coating is growing in the casting community. On the CB site you can see it being discussed more and more each day.I will stick to the basic size and lube setup.
As a general rule PC adds about .0015 to a cast bullet.

Sean

Has powder coating totally eclipsed paper patching cast? - WB, 2019-10-23, 20:29
- FIRST TWO TARGETS ARE PC BULLETS - JT, 2019-10-24, 06:39
  - Sorry - Shaun, 2019-10-24, 08:58
- Not with me .. - Jim Taylor, 2019-10-24, 05:47
- Not sure about powder coating for PP bullets but - Sean Harper, 2019-10-24, 05:45
  - I never really got that precise, couple wraps - WB, 2019-10-24, 08:39
  - I never shoot any thing but cast - Lynn, 2019-10-24, 07:58
  - I've seen some coated bullets shot at 1800-2000 fps.. - Huey, 2019-10-24, 06:11
    - I use the Missori 200grain coated. almost exclusivly in all - Kevin E, 2019-10-24, 08:22
      - Have used a few thousand Missouri PC - ChrisG, 2019-10-24, 11:01
      - Those look good! (nm) - WB, 2019-10-24, 08:35
    - Huey, you probably know this - steve todd, 2019-10-24, 08:09
      - Yep and will be some of the first to go down that barrel... - Huey, 2019-10-24, 08:44
    - I have been testing some 120 fp .312 cast bullets - Amede, 2019-10-24, 06:56
      - I'm running .257" 80 gr. PC-FNGC at 2400 fps+ - WB, 2019-10-24, 08:03
        I had ordered some to try, but think that is the - Amede, 2019-10-24, 11:15
        I started with a back to school toaster over from Wal-mart - WB, 2019-10-24, 12:26
        I’ve got some hot pink for crappie lures, and glow i (nm) - Josh, 2019-10-25, 02:43
- Believe pure lead has been used for both. (nm) - Asa, 2019-10-23, 23:05