Reeder Custom Guns - I know GNR has been running 10mm since day one.

WB
I know GNR has been running 10mm since day one.
Friday, November 22, 2019, 20:21

I bet Kase was chasing hogs with one when it first came out, as a pre-teen. The unit I am toying with has a full length recoil spring guide rod and super stiff spring, with a bumper set up. My question is how necessary is that full length guide rod? Wilson makes a flat spring set up kit special with normal plug for the 10. It sure would be nicer to take apart with a more typical spring plug and short guide.

Is there really trouble with spring binding on a 10? I'm not really into hot rodding the 1911 10mm, domestic factory level loads.

I know GNR has been running 10mm since day one. - WB, 2019-11-22, 20:21
- Scotty what platform are asking about - Blake, 2019-11-23, 05:33
  - This AMT is so stiff I can barely rack the slide. - WB, 2019-11-23, 13:05
    - if you have the AMT Javelina they are stiff. - Gary Reeder, 2019-11-23, 14:59
      - Thank you! (nm) - Alcorn, 2019-11-23, 20:12
- Kase and I were both hunting with the 10mm - gary reeder, 2019-11-22, 22:53
  - Longslide perfection - Blake, 2019-11-23, 14:02
  - What bullet do you like in the 10mm? (nm) - John W, 2019-11-23, 07:31
    - after my little experience with the bear - Gary Reeder, 2019-11-23, 12:05
      - A friend went handgun hunting specifically - WB, 2019-11-23, 13:34
- !0 mm Vs 40 super - Alcorn, 2019-11-22, 21:58
  - Gary or Case - Kevin E, 2019-11-23, 10:55
  - 10 mm Vs 40 super - Alcorn, 2019-11-23, 06:44
    - Alcorn, which platform are using for the 40 super? (nm) - Derek, 2019-11-23, 08:59
      - Long slide(6") 1911 (nm) - Alcorn, 2019-11-23, 10:16
        Gun is a full custom made from scratch - Alcorn, 2019-11-23, 10:28
        Gun needed recoil reduction Mag-na-port (nm) - Alcorn, 2019-11-23, 10:30
        More power to you. The .400 Corbon only hotter - WB, 2019-11-23, 13:08