Reeder Custom Guns - I made some 10mm "auto rim" but

WB
I made some 10mm "auto rim" but
Saturday, November 23, 2019, 13:11

it was a real chore. they still had to headspace off the case mouth. Real tricky with the short 10mm. Longer 10mm mag would be lots easier. The .30-30 were too thick at the neck. Modded .41 Rem. worked after lathe turning the outer web. The rims can touch too as the pawl gear on the cylinder gets in the way. Like I said a real engineering feat.

10mm What Is It? - Huey, 2019-11-23, 11:47
- Do you also have a 10mm - Josh, 2019-11-23, 14:57
  - Yes, the above project is for a GP-100 in 10mm... - Huey, 2019-11-23, 15:01
    - That’s my favorite one - Josh, 2019-11-23, 15:45
- That's the ol' 10MM Hangitout Sumore (nm) - Asa, 2019-11-23, 13:08
- we have rechambered several dozen 10mm revolvers to 10mm Mag - Gary Reeder, 2019-11-23, 11:52
  - I made some 10mm "auto rim" but - WB, 2019-11-23, 13:11
    - I'm not energetic enough for that much work... - Huey, 2019-11-23, 14:10
      - yep, life is too short to do all that when you can buy brass - Gary Reeder, 2019-11-23, 15:09