9.3mm Bullets - Not wanting to derail the below threads...

Huey
[subject]
Wednesday, December 04, 2019, 11:56 (2457 days ago)

I have multiple 9.3mm rifles. Namely (2) 9.3x57mm, (2) 9.3x62 and a 9.3x74R.

Gary's 361 GNR truly interests me. So, I've been thinking. I've got lots of Sierra 200 grn 375 Winchester bullets. Actually, an embarrassing number of them. Also, lots of Speer 220s and Hornady 225 Spire Points.

Haven't measured them, but say they're a full .375". Sizing them down to .366/.367" SHOULD be a breeze.

Have the Forster HP Tool that could make them even more interesting.

This could make one of the most interesting G2s to be had.

This stuff is sure hard on my bank account...

Post reply
 

Yeah that should work fine, lube it a little

WB
[subject]
Wednesday, December 04, 2019, 13:20 (2457 days ago) @ Huey

I find the smaller the diameter gets the smoother the size down. However in my playing about 0.010" is as far as I think you should go. If you have varied sizers, you can in theory keep going. Lots of cool options.

Post reply
 

I did the same thing when working up loads for the

Sean Harper
[subject]
Wednesday, December 04, 2019, 13:25 (2457 days ago) @ WB

361 Falcon and the 366 GNR, easily done with a little lube.

Sean

Post reply
 

Interesting...A 9.3mm Lever Action would be different...

Huey
[subject]
Wednesday, December 04, 2019, 14:23 (2457 days ago) @ Sean Harper

- No text -

Post reply
 

That would be one looong lever throw!

Drdougrx
[subject]
Wednesday, December 04, 2019, 19:58 (2457 days ago) @ Huey

- No text -

Post reply
 

About the same as my Winchester in 405

Woody
[subject]
Wednesday, December 04, 2019, 21:50 (2457 days ago) @ Drdougrx

- No text -

Post reply
 

No longer than a 30-30...

Huey
[subject]
Thursday, December 05, 2019, 04:22 (2456 days ago) @ Drdougrx

- No text -

Post reply
 
powered by my little forum