run the brass thru one of those first as a step down. Then lube the case again and go on down to 338. I have tried going from 405 all the way down to 338 but ended up losing a few pieces of brass. I usually go from 406 down to 375 (in my 378 GNR sizer die) then down to 350 GNR (.358) then on down to 338 and never lose a round.You only have to do this the first time.
-
rookie question
- Dave Flanagan, 2020-02-10, 10:31
![[*]](themes/default/images/complete_thread.png "Open whole thread")
-
if you have any dies in 375, 358 or 366 caliber
- Gary Reeder, 2020-02-10, 13:08
- Yep, saved me a bunch of brass! (nm) - Larryh, 2020-02-10, 13:24
-
if you have any dies in 375, 358 or 366 caliber
- Gary Reeder, 2020-02-10, 13:08