Reeder Custom Guns - Huey is right. The cartridge is designed for 60 grain or

Gary Reeder
Huey is right. The cartridge is designed for 60 grain or
Thursday, May 28, 2020, 11:32

slightly heavier bullets. We have had very good luck with this cartridge and no problems at all. My guess is that heavier bullet isn't stabilizing in that twist. The cartridge was designed for a revolver and using 60 grain bullets that fit in the cylinder.

251 Falcon help - Andy, 2020-05-27, 15:08
- Andy, also did you get the dies and load data - Gary Reeder, 2020-05-28, 11:35
  - Got dies, little data. - Andy, 2020-05-29, 14:44
- Andy, first we need to know if the gun is chambered - Gary Reeder, 2020-05-27, 16:12
  - First what chambering??? (nm) - Ahhh, maybe 251, 2020-05-28, 04:10
  - 251 Falcon - Andy, 2020-05-27, 18:27
    - If that barrel has the 1 in 14" twist, that bullet probably. - Huey, 2020-05-28, 02:55
      - Huey is right. The cartridge is designed for 60 grain or - Gary Reeder, 2020-05-28, 11:32
    - That is a possibility, long bullet - WB, 2020-05-27, 20:07
- I was shooting a 12" Contender in .256 Falcon - WB, 2020-05-27, 16:11
- 256 Falcon. Not knowing what load - Blake, 2020-05-27, 16:01