Reeder Custom Guns - Starline 44-40 Brass comes tapered. Blows out the shoulder..

Huey
Starline 44-40 Brass comes tapered. Blows out the shoulder..
Wednesday, June 03, 2020, 14:29

On the first firing. Their 38-40 Brass is necked, but the shoulder is way too far back. It blows out and forward on first firing.

Starline Nickel Plated 44-40 WCF Brass... - Huey, 2020-06-03, 07:21
- I mixed up and shot .44-40 in .45 Colt once! - WB, 2020-06-03, 13:36
  - I recently measured some Starline Brass... - Huey, 2020-06-03, 13:44
    - My reloads are more tapered than bottlenecked in .44-40. - WB, 2020-06-03, 14:16
      - Starline 44-40 Brass comes tapered. Blows out the shoulder.. - Huey, 2020-06-03, 14:29
- I have some Starline Nickel 45 Auto Rim brass - ChrisG, 2020-06-03, 11:38
- I ESPECIALLY PREFER NP BRASS FOR - JT, 2020-06-03, 09:15
- Had avoided because of the stories, I do have a couple - Asa, 2020-06-03, 08:19
  - It may be different in straight cases than bottleneck cases. - Huey, 2020-06-03, 08:29
    - Was going to ask your thoughts on that, seems to have been - Asa, 2020-06-03, 09:30
- Picture... - Huey, 2020-06-03, 07:39
  - Gonna have to get me some of those in 45 Lc (nm) - Derek, 2020-06-03, 15:37
    - I figure ideal to segregate hot loads in vintage cartridges - Huey, 2020-06-03, 16:06
  - This a porn site now??? (nm) - ChrisG, 2020-06-03, 11:56
  - That pic makes me smile! Woo hooo! (nm) - Jk, 2020-06-03, 07:43

powered by my little forum