Minor variations in thickness are probable but diameter should match up. It is an unusual problem. I've had early 94s where the carrier supports get loose and you have to fanagle tiny screwdrivers on the inside to tighten the screws. Yours is modern era gun without that problem. Your gun should be tapped for Williams peep sight. But I might be wrong.
-
win 94in 30-30
- joepjs, 2020-06-10, 09:05
![[*]](themes/default/images/complete_thread.png "Open whole thread")
- Some times its as simple as making sure - Sid R, 2020-06-11, 05:58
- I have a Canadian Centennial as well. I replaced - Patrick McCann, 2020-06-10, 16:23
- not an unusual problem with a commemorative. I have - Gary Reeder, 2020-06-10, 14:14
- The magazine tube may have an issue - steve todd, 2020-06-10, 11:54
-
check the rim diameters with a micrometor
- Jim Taylor, 2020-06-10, 11:13
- win 94in 30-30 - joepjs, 2020-06-11, 13:53
- Also check rim thickness plus since... - MountainWanderer, 2020-06-10, 11:16
- 3030 brass should all have same head size - Chance Dunlap, 2020-06-10, 10:58
- The feed problem is interesting. I have the same - Darryl T., 2020-06-10, 09:34