Reeder Custom Guns - The 44 Magnum Expander in the Powder Thru Die...

Huey
The 44 Magnum Expander in the Powder Thru Die...
Friday, June 12, 2020, 18:22

By Lee measured .428". It's made to hold .429-.431" bullets. So, $13 later I had a spare on the way and replaced the slightly too small one of the 44-40 Expander.

JT had clued me into this before I started loading for the 44-40. It works like a charm.

Convert a .44 magnum to 44WCF - Drake Elliott, 2020-06-12, 12:03
- YOU MAY NEED NEW DIES AS THE - JT, 2020-06-12, 13:09
- shouldn't be a problem. (nm) - Gary Reeder, 2020-06-12, 12:11
  - Replying 44mag to 44WCF - Drake Elliott, 2020-06-12, 12:32
    - Think I'd get Gary to add an auxiliary cylinder in 44-40... - Huey, 2020-06-12, 13:37
      - About the Lee expander - Drake Elliott, 2020-06-12, 18:12
        THIS WAS THE PROBLEM WITH THE - JT, 2020-06-12, 20:42
        The 44 Magnum Expander in the Powder Thru Die... - Huey, 2020-06-12, 18:22
      - EXTRA CYLINDER DEFINITELY THE WAY (nm) - JT, 2020-06-12, 14:27
    - either way I would need the whole gun in here - Gary Reeder, 2020-06-12, 12:58
      - I’ll send the gun as soon as I get it - Drake Elliott, 2020-06-12, 18:14