Reeder Custom Guns - Hello All. HELP!!!!!!!!!!!

I have a Ruger Mk 4 Lite 22/45 and somehow " locked it up". I did put in a Tandemkross trigger a while ago and did some shooting yesterday. I had some issues with the trigger going fully forward and so I adjusted a tiny screw.

Anyways I put the top receiver back on and now it is "locked up"

I cannot rack the bolt back nor disassemble the gun. The safety is in the position between fire and safe and will not go up into the safe position.

Any hints outside of sending it to Ruger?

Thank you

Post reply

say anything. You can always send it back to Ruger. They will yank that new part out before sending it back, but that is probably the problem anyway.

Post reply

- No text -

Post reply

It seems to be a dying profession.

I did get the two parts to disassemble but when I assemble the gun the bolt will not retract.

I do believe a trip to Ruger is needed.

Post reply

You do it all the time. Got to hold your mouth just right. Go backwards from where and what got you here to un-do the situation.

Post reply

previous models. Inside and out. A lot of the "improvements" shown on the internet for the previous models will not fit the MK 4.

Post reply

Hello All. HELP!!!!!!!!!!!

without seeing the gun I would be hesitant to

NO LOCAL GUNSMITH(S)?

Not mant left.

Those require considerable finesse unless

The MK 4 is different from the other