Reeder Custom Guns - Lost power at house , Mr Jim is correct

Sean Harper
Lost power at house , Mr Jim is correct
Monday, June 22, 2020, 16:41

357 Max brass
I run them thru a 30 Herrett die and load with 115 gr of #8
And bullseye powder and seal with a little swap of micro lube on top.
Shoots 1200 FPS, need a little refinement but a good start

Sean

Riddle of the day for reloaders - Sean Harper, 2020-06-22, 13:14
- neat looking revolver (nm) - Lynn, 2020-06-24, 10:35
- Lost power at house , Mr Jim is correct - Sean Harper, 2020-06-22, 16:41
  - Picture of loaded case - Sean Harper, 2020-06-22, 17:07
    - The brown looking stuff is microlube, used to seal the case (nm) - Sean Harper, 2020-06-22, 17:08
      - I used simple card wads in .41 Magnum once - WB, 2020-06-23, 08:33
- So, what's going on here??? (nm) - Clyde, 2020-06-22, 16:15
- Don't you always work up a load. - Sid R, 2020-06-22, 13:49
- Those are mean looking hard cast bullets - WB, 2020-06-22, 13:34
  - am I missing something here. Sean is not s howing any hard - Gary Reeder, 2020-06-22, 13:41
    - They show the case extended into the throats and.. - Huey, 2020-06-22, 13:44
    - I thought he quit drinking. (nm) - Darryl T., 2020-06-22, 13:43
      - You know I only got one good eye - WB, 2020-06-22, 13:49
        those 2 on the left are bulged big time - Gary Reeder, 2020-06-22, 13:51
        I didn't mean .414 brass, .357 Max. would be best. - WB, 2020-06-22, 17:40
        I think I will try a shotshell load in my 454 - Sean Harper, 2020-06-22, 17:45
        Yeah that works great. I used - WB, 2020-06-22, 18:26
        Shot loads for snakes? (nm) - Jim Taylor, 2020-06-22, 13:51
        I would have to go with Jim. 357 Max brass and - Gary Reeder, 2020-06-22, 14:15
        Would have to be the sloppiest chambers in history... - Huey, 2020-06-22, 14:19
        Eliminates that big nasty - Jk, 2020-06-22, 14:47
        357 max brass necked for bird shot? (nm) - Bucky, 2020-06-22, 15:14