.321 GNR in a K Frame Revolver?

Keith
[subject]
Friday, September 18, 2020, 12:51 (2159 days ago)

I'm considering having the cylinder on one of my .32 caliber S&W K frames (Model 16-4, full lug barrel) reamed to .321 GNR. What's the performance folks have experienced with this cartridge out of a 6" barrel?

I have an 8 3/8" I'd consider as well, if the cartridge benefited greatly from the longer length. However, that one isn't nearly as handy.

Post reply
 

it will equal a light bullet (125 or 110 grain bullet) 357

Gary Reeder
[subject]
Friday, September 18, 2020, 14:15 (2159 days ago) @ Keith

Magnum with less recoil. It shoots faster and flatter and in the guns so far is as accurate or more accurate than either the 357 Mag or 327 Federal. Several of the Misfits have them and are getting great results.

Post reply
 

What sort of bullets have you been testing?

Keith
[subject]
Saturday, September 19, 2020, 22:07 (2158 days ago) @ Gary Reeder

Mostly the ubiquitous 100 gr lead/jsp/jhp? Have you gotten worthwhile performance from the light (<80 gr) .32 cal bullets?

Post reply
 
powered by my little forum