Reeder Custom Guns - Brent, have you checked the OAL of that cartridge with those

Gary Reeder
Brent, have you checked the OAL of that cartridge with those
Monday, November 09, 2020, 12:47

bullets? I have used maybe a hundred of them that someone either sent me or they were in an estate we bought out and for them to be at my set OAL of 1.15 I had to seat them right at .010 from where the taper starts. I noticed that yours are probably .065 or .070 from where the taper starts. Not saying your loading is wrong but in my guns that would be too long to go in the magazine. The company may have changed the design of the bullet and made the nose a bit shorter in the years since I tried them. If they fit in your magazine, just disregard this post.

Sunday afternoon reloading - Brent Clark, 2020-11-08, 19:59
- Brent, have you checked the OAL of that cartridge with those - Gary Reeder, 2020-11-09, 12:47
  - Measurements - Brent Clark, 2020-11-09, 15:49
    - very good. Sorry for the hassle but I have loaded a bunch - Gary Reeder, 2020-11-09, 16:38
      - No problem. Thanks for watching out (nm) - Brent Clark, 2020-11-09, 17:43
- What bullet are you loading in those photos - jthomson, 2020-11-09, 04:46
  - Xtreme Bullets - Brent Clark, 2020-11-09, 10:09
  - Look like plated (nm) - Darryl T., 2020-11-09, 08:20
- Same thought .... - David R, 2020-11-08, 20:44