Reeder Custom Guns - It looks like the mouth is still too wide at

O’Gary
It looks like the mouth is still too wide at
Thursday, November 26, 2020, 15:38

.375 and getting hung up before forming the mouth & neck at .308. Try necking down a bit more, .358, before going to .308. I would also anneal the cases prior to necking smaller than .375. And don’t spare the lube.

Case forming attempt gone wrong! - Larryh, 2020-11-26, 11:03
- If you had a .405 you could blow that back out too! (nm) - WB, 2020-11-27, 07:17
- if you were WB you would cut that case just below - gary reeder, 2020-11-26, 21:30
  - Looking like it might make a dandy all brass .410 shotshell! - WB, 2020-11-27, 06:47
    - Or blow out 303 British for 405 short? (nm) - steve todd, 2020-11-27, 08:38
- 310 - Timothy Dollar, 2020-11-26, 19:15
- you may have to go down even more than 378 - gary reeder, 2020-11-26, 16:17
  - I’ll do that Gary, thanks! (nm) - Larryh, 2020-11-26, 18:48
- It looks like the mouth is still too wide at - O’Gary, 2020-11-26, 15:38
  - I went from 405 to 310 on the one shown. - Larryh, 2020-11-26, 15:49
- It does look happy... (nm) - ChrisG, 2020-11-26, 12:15
- Curious... is that a .450 Marlin w/the belted case? (nm) - azj, 2020-11-26, 11:44
  - It is. I have a 1895MR. Love it! (nm) - Larryh, 2020-11-26, 11:48