Is to turn it into a K-Hornet. Then your main weakness will be expanding primer pockets. It pays to back off on the little booger. The K coasts where the standard is ruining cases. Only problem is feeding issues with a repeater, sliding a straight sided sharp shoulder through that magazine and into the chamber. I’d consider that seriously.
Any single shot application I’d run, not walk, to do the conversion.
-
22 Hornet twist rate question
- Dave H., 2020-12-01, 07:51
- Those 22 pellets with nail set blanks - steve todd, 2020-12-01, 11:37
- get a 1-12 I shoot from 30 grain to 50 grain - Sunny, 2020-12-01, 08:35
-
Go with 1-14" or even 1-12"...
- Huey, 2020-12-01, 08:33
-
I had what I figured was a 1:16" and using 55 gr. FMJ
- WB, 2020-12-01, 09:21
-
Cartridges of the World says 14 or 16 twist for the normal
- Gary Reeder, 2020-12-01, 10:42
-
Currently playing with my CZ527 in 22H. It has
- Drdougrx, 2020-12-01, 11:19
- The absolute best thing you can do for a Hornet - WB, 2020-12-02, 09:52
-
Currently playing with my CZ527 in 22H. It has
- Drdougrx, 2020-12-01, 11:19
-
Cartridges of the World says 14 or 16 twist for the normal
- Gary Reeder, 2020-12-01, 10:42
-
I had what I figured was a 1:16" and using 55 gr. FMJ
- WB, 2020-12-01, 09:21