Reeder Custom Guns - It would be a trick but I'd love to try one case...

WB
It would be a trick but I'd love to try one case...
Friday, December 11, 2020, 14:59

By going in about 1/10 increments on a well lubed case I just wonder. Maybe, and it's a bit of a long shot, one can use the FL die to re-raper and mod a .300 Winchester case? I have some of those. Backward engineering but it might iron and lengthen the Winchester to work. I'd blow a case just to know.

I think making them from .375 H&H would be pretty easy.

Any of you Misfits have .300H&H brass? - Larryh, 2020-12-11, 13:40
- H&h brass - Mike horn, 2020-12-13, 12:59
- THANK YOU ALL! Got what I needed. - Larryh, 2020-12-12, 13:41
- I have 2 boxes of Hornady 180gr InterBond - Ronnie P, 2020-12-11, 20:20
  - Can’t ship it commifornia, but thanks! (nm) - Larryh, 2020-12-11, 20:58
    - Gotcha (nm) - Ronnie P, 2020-12-11, 21:25
- 300 H&H - James Simpson, 2020-12-11, 17:38
  - Email me! - Larryh, 2020-12-11, 18:28
- H&H - Mike horn, 2020-12-11, 15:51
  - Appreciate it Mike! (nm) - Larryh, 2020-12-11, 17:11
    - None to be found...if I do I will get you - Mike horn, 2020-12-13, 16:04
  - 300 H&H - Jim & Nancy Frost, 2020-12-11, 16:00
    - 300 H&H stash - Jim & Nancy Frost, 2020-12-11, 16:54
      - Jim, if I weren’t in commifornia, I would. (nm) - Larryh, 2020-12-11, 17:09
        Understand, we were lucky to escape (nm) - Jim & Nancy Frost, 2020-12-11, 17:28
        Sent you an email Jim. (nm) - Larryh, 2020-12-11, 18:24
        You can have it sent to my son’s store - steve todd, 2020-12-12, 01:54
- Larry I will look tonight. I MIGHT have a small stash - Amede, 2020-12-11, 15:10
  - No luck on 300 H&H,must've donated those elsewhere (nm) - Amede, 2020-12-11, 16:42
    - Thanks for checking! (nm) - Larryh, 2020-12-11, 17:10
- It would be a trick but I'd love to try one case... - WB, 2020-12-11, 14:59
  - Been watching for 375H&H also. Have 300Win May try it. (nm) - Larryh, 2020-12-11, 15:26
    - 300 Win Mag would be way too short, right? (nm) - Huey, 2020-12-11, 16:22
      - Not after you mashed it into a long taper! (nm) - WB, 2020-12-11, 16:24
    - You'd not want to do it in a single pass, many small ones. - WB, 2020-12-11, 15:32
      - Think I have some 300 H&H - Alcorn, 2020-12-11, 16:52
        Thank you Alcorn! (nm) - Larryh, 2020-12-11, 17:12
        If you don`t get what you need call me - james, 2020-12-12, 10:46
        No 300 H&H sorry (nm) - Alcorn, 2020-12-12, 10:56