Reeder Custom Guns - I’ve done that with a .38 Spec. but you probably should no

WB
I’ve done that with a .38 Spec. but you probably should no
Friday, December 18, 2020, 08:11

In a DA that will accept them the tiny rims jump the ejection stars. But if the firing pin has the reach and a sloppy fit does not take all the zip from the hammer hit, it can work. If only for a dire Die Hard or Red Dawn application. Good to know. Most .22 WMR will happily fire .22 RF, while bulging or even splitting the cases (surely spitting a bit of gas too) it fires.

I read an article where a robber was caught with a .44 revolver (I think it was abroad where resources are limited). They found he had TWO .22 rimfire rounds in each .44 cylinder! While he had bad judgement and knew little of firearms it seems his math skills were still intact. Lol

If you guys are not shooting semi-auto rounds in your SA - WB, 2020-12-18, 07:57
- Charter Arms makes a .40 Pitbull snubby (nm) - azj, 2020-12-18, 11:30
  - Yeah that's the one I was refering to have they - WB, 2020-12-18, 18:45
- Great for the experimenter above all else... - Huey, 2020-12-18, 10:05
- My old Model Ruger 357 works with 38 Supers. (nm) - Jim Taylor, 2020-12-18, 08:00
  - Works with 38 Supers in the 357 cylinder. (nm) - Jim Taylor, 2020-12-18, 08:01
    - I’ve done that with a .38 Spec. but you probably should no - WB, 2020-12-18, 08:11
      - For best results of .22 LR in .22 Magnum - Jim Taylor, 2020-12-18, 08:16