Reeder Custom Guns - That is the problem with the tube feed Mariln

WB
That is the problem with the tube feed Mariln
Monday, January 04, 2021, 14:50

It is basically teeter-totter in the stock with that one mid-point stock bolt. I need to fabricate a bed that forces it to "totter" only one direction. Not only am I floating the barrel but the magazine feeding tube under it as well. I don't think the receiver will be stressed. It's mostly a solid tube of steel with that bedding pillar at the front of it.

[image]

Got to shoot just a bit this afternoon... - WB, 2021-01-03, 17:30
- I have Marlins that are 1/2” at 50 with open sights. - Sid R, 2021-01-04, 09:17
  - That is the problem with the tube feed Mariln - WB, 2021-01-04, 14:50
    - My 881 22 or just sand and even torque. (nm) - Sid R, 2021-01-04, 17:19
- I meant to say I’m going to glass bed it - WB, 2021-01-03, 17:35
  - Typical first (3) at 100 yds., heating up same distance. - WB, 2021-01-03, 18:10
  - I like the .22 Magnum! The Ruger American .22 Mag - Jim Taylor, 2021-01-03, 18:06
    - YES IT WILL! CZ AND SAVAGE ALSO GREAT (nm) - JT, 2021-01-03, 19:08
    - I’ve heard the plastic Rugers really shoot. - WB, 2021-01-03, 18:15
      - I traded into this one ... - Jim Taylor, 2021-01-03, 18:44
        Hey if it works... I like the .17 HMR a bunch myself - WB, 2021-01-03, 20:04