Reeder Custom Guns - Testing Some 9mm Handloads

Shooting into 1/2" pine boards stacked up ...

[image]

The Red Dot loads are fairly stout but not top end. The 130 gr. JSP is a .357 Magnum bullet I got from Precision Delta. They are .356" ... I ran them through a Lee Bullet Sizing Die and they come out .355" ... and have no issues feeding or chambering in my gun.

Post reply

I came by a ton of .357" 125 grn bullets. I size them down and use them in 9mm and 38 Super.

My next project is to long seat 147 grn Coated FN in 9mm. Think it'll easily match the 38 Super and maybe best it. Of course, can do the same with the 38 Super.

Testing Some 9mm Handloads

I do a lot of that too. A much better way to learn...

For the Trail Gun 9mm...

the loads posted above should read Blue Dot