Reeder Custom Guns - Yes well enough. Usually a thou or two larger than most

WB
Yes well enough. Usually a thou or two larger than most
Tuesday, March 09, 2021, 18:51

but it's better to be a teeny bit bigger than too small. I have several. Only thing is if you powder coat them it will add about 0.003" to the diameter. A trick is to use a 9mm mould and coat to use in .357/.38. The bump up is perfect. The .45's work fine.

The liquid alox tumble lube works fine too. It's a little messy if you are careless but dried it loads fine. Shooting it's a touch smoky but who cares. It will save you buying $300 H&I sizer kit for a while. LEE sells push-through sizer kits for about $30 that are fine.

Enjoy and jump on in.

Casting Bullets - Grover Sr, 2021-03-09, 18:16
- NOE makes push through sizers too - steve todd, 2021-03-09, 23:43
  - who is NOE? (nm) - Warren Lake, 2021-03-10, 17:33
    - NOE is - Carl L, 2021-03-10, 18:16
    - I was wondering also. Didn't he build a big boat? (nm) - Jim Taylor, 2021-03-10, 17:53
      - no, that was Noah (nm) - gary reeder, 2021-03-10, 21:57
  - with all the guns we have to test fire here - Gary Reeder, 2021-03-10, 10:25
  - I did not know that, NOE... (nm) - WB, 2021-03-10, 06:57
- I use the Lee siziing dies to give me the best - Amede, 2021-03-09, 20:18
- Yes well enough. Usually a thou or two larger than most - WB, 2021-03-09, 18:51
- DEPENDS WHAT SIZE YOU NEED (nm) - JT, 2021-03-09, 18:46