Gary Reeder
you cast like I do. The first bullets I put on a vise
Saturday, March 20, 2021, 14:56

and give it a good tap with a hammer. If it mashes it is too soft so a bit more linotype. If it shatters, then too much linotype, put some more wheel weights in. Put the first few bullets on the scale. If they are within 2 or 3 grains, they are fine. The really wrinkled ones go back in the pot. The slightly wrinkled ones get sized and shot. If they are perfect with no wrinkles I know I did something wrong, but I save them and tell people all my bullets look like that.

I tried water quenching them by dropping them from the mold into a 5 gallon bucket but after quenching myself completely along with everything within 10 feet I gave up on that.

This casting bullets can be fun after I learned to take all the casting books and rules and using them to start a fire in one of our wood stoves. I make a lot less mistakes when I do that.


powered by my little forum