![[image]](images/uploaded/20210503183323609041f362806.jpg)
The bullet was designed to just slip into the cartridge and be seated by finger pressure. The larger diameter front band made it necessary to use a cartridge slightly shorter than normal, as the band on the bullet was against the cylinder throat. This acted like a crimp and kept the loads from "pooping" ... it allowed them to build normal pressure just the same as if it were crimped.
in .357 used a .38 Special case
in .38 special used a .38 Long Colt case
in .44 Magnum used .44 Special case
in .44 Special used .44 Russian case
in .45 Colt cases were trimmed .120" or so.
![[image]](images/uploaded/20210503183714609042da1c40c.jpg)
![[image]](images/uploaded/20210503183732609042ec465c4.jpg)
![[image]](images/uploaded/20210503183751609042ff9802a.jpg)
-
Years Ago my Dad produced and sold bullet molds ...
- Jim Taylor, 2021-05-03, 08:54
-
Bullets
- Jim Taylor, 2021-05-03, 11:37
- Thank you very much Jim ! - backroadsrambler, 2021-05-03, 14:32
- wow (nm) - LYNN, 2021-05-03, 10:46
- Boy! That is so inspiring! (nm) - WB, 2021-05-03, 10:05
- YOUR DAD WAS SO RESOURCFUL! I - JT, 2021-05-03, 09:40
- If you get the chance Jim, would you... - backroadsrambler, 2021-05-03, 09:32
- Fascinating -- what fun! - backroadsrambler, 2021-05-03, 09:24
- Neat! (nm) - Russell Cottle, 2021-05-03, 09:12
-
Bullets
- Jim Taylor, 2021-05-03, 11:37