Reeder Custom Guns - I am in need of a set of 250 ackley improved dues. Would

plus a lot of other unusual die sets. Fred (the younger, not his Dad, old Fred, although the younger is probably in his 70s) is a really nice guy and a good friend. If he isn't there one of his people can help you. His number is 530-534-1210.

Post reply

Collet die to size the neck for tension and a universal seating die to seat bullets. This is of course not a universal solution as the cases must be fired in your gun to fit again and after several reloads will have to have the shoulder bumped back a few thousands to continue to fit. It will give you an accurate method of reloading until a resizing die can be located. I do most of my rifle cases in this method.

Post reply

make a Collet die of 250 savage, however you might get a 257 Roberts to work with a bit of mod for length since the only thing entering the die is the neck.

Post reply

Try Troy at bullberry. That is a pet round for him

Post reply

I have a set of RCBS .250 AI 40 degree shoulder. Will take $40 plus S&H.
Email palmertriplett@outlook.com.

Post reply

I am in need of a set of 250 ackley improved dues. Would

Dies not dues

Hornady sold a “universal neck sizer” die in both short body

Found this

That is a great die set but pricey and a long time coming

Thought I had a set but going through my boxes did not

Blake, thanks for the link. My be the way to go as other

yeah, $162 with 5 month delivery, maybe.

Is this for a 250/300 AI or the 257 AI?

The 250/3000 AI .

Tom, don,t forget to check or call Huntingtons.

Fred Huntington is where I got my set

250/3000 AI workaround by using a LEE

unfortunately I just checked and LEE does not

250 3000 imp dies

.250 AI