Reeder Custom Guns - 250/3000 AI workaround by using a LEE

jthomson
250/3000 AI workaround by using a LEE
Sunday, August 08, 2021, 13:05

Collet die to size the neck for tension and a universal seating die to seat bullets. This is of course not a universal solution as the cases must be fired in your gun to fit again and after several reloads will have to have the shoulder bumped back a few thousands to continue to fit. It will give you an accurate method of reloading until a resizing die can be located. I do most of my rifle cases in this method.

I am in need of a set of 250 ackley improved dues. Would - Tom S, 2021-08-07, 11:06
- .250 AI - Palmer Triplett, 2021-08-19, 06:17
- 250 3000 imp dies - Mike horn, 2021-08-09, 06:29
- 250/3000 AI workaround by using a LEE - jthomson, 2021-08-08, 13:05
  - unfortunately I just checked and LEE does not - jthomson, 2021-08-08, 13:12
- Is this for a 250/300 AI or the 257 AI? (nm) - bigboar, 2021-08-07, 14:54
  - The 250/3000 AI . (nm) - Tom S, 2021-08-07, 16:09
    - Tom, don,t forget to check or call Huntingtons. (nm) - Mark Wilson, 2021-08-08, 11:39
      - Fred Huntington is where I got my set - Gary Reeder, 2021-08-09, 11:41
- Found this - Blake, 2021-08-07, 14:22
  - yeah, $162 with 5 month delivery, maybe. (nm) - gary reeder, 2021-08-08, 11:17
  - That is a great die set but pricey and a long time coming (nm) - Tom S, 2021-08-07, 16:11
    - Blake, thanks for the link. My be the way to go as other - Tom S, 2021-08-08, 03:39
    - Thought I had a set but going through my boxes did not - Tom S, 2021-08-07, 16:15
- Hornady sold a “universal neck sizer” die in both short body - WB, 2021-08-07, 11:14
- Dies not dues (nm) - Tom S, 2021-08-07, 11:07