Gary Reeder
not quite. I have 8 Dillon presses, two RCBS
Wednesday, December 01, 2021, 12:12

turret presses, an RCBS Ammo Master press and a Lyman lubri-sizer. I think there is a Redding turret press in the pics but I sold it. I can buy 2 RCBS turrets for what one Redding costs and the RCBS is just as good.
I have all the Dillons and the others as I have to reload just about every night for ammo for test firing the next day. With the Dillons I just sit down and crank out 100 to 200 in an hour and the Turrets are almost as fast. I use the turret presses for the necked down cartridges like the 41 GNR, 410 GNR, 356 GNR and such. They do better on a solid shell holder set up than the Dillon spring loaded shell plate that gives slightly. The solid shell holder set up puts the shoulder where it has to be to fit in a cylinder.
I use the big Ammo Master for the large stuff like 500 Jeffrey, 470 Nitro, 500 Nitro and such. I have an RCBS Rock Chucker here at the shop for when I need to load a cartridge for head spacing and such.


powered by my little forum