WB
You can tell a lot about a fireball.
Friday, February 04, 2022, 07:55

My .429 GNR revolver is a stock gun re-chambered, with some cosmetic embellishments. The barrel/cyl. gap is about double what Gary would furnish with a re-barrel. You could spec the barrel to be set back and tighten the gap. That would cost a little but would be worth it for a custom.

I have some pics of FA guns with muzzle fire only, no cylinder flash. Their gap looks to be touching but is not. I have no gauge small enough to measure the gap! Personally I think they can be too tight for reliability.


powered by my little forum