have one foot on a very steep and slippery slope and the other on a banana peel and its a long way to the bottom.
My casting set up is as basic as you will find anywhere. A cast iron pot, a propane turkey fryer from Harbor Freight, and a RCBS ladle. My moulds are LBT, Accurate, NOE and Lyman with a couple of round ball Lees thrown in.
If I were going to start over today I would really look at powder coating, but being old I love the smell of bees wax and grease when you pop the top off a container of bullets, and seeing the smoke from shooting a good traditionally lubed cast bullet.
-
With Jim's post "Warm Fun on a Cold Day"
- Mark Conner, 2022-02-26, 15:05
![[*]](themes/default/images/complete_thread.png "Open whole thread")
-
I did pretty much the same thing last Saturday. Sized 400
- DinCA, 2022-02-26, 18:01
- More bullets to load for some of Gary's custom work. - DinCA, 2022-02-27, 08:12
-
That Post Inspired Me...
- ~JM~, 2022-02-26, 15:09
-
JM, if you have bought a mould you
- Mark Conner, 2022-02-26, 17:16
- Yes Indeed... - ~JM~, 2022-02-26, 18:54
-
That's one reason powder coating is so popular
- WB, 2022-02-26, 15:22
-
That IS Appealing
- ~JM~, 2022-02-26, 15:25
-
I lucked into a very expensive RCBS pot
- WB, 2022-02-26, 16:08
- I bought the used pot and #1000 lead for $350! - WB, 2022-02-26, 16:29
-
I lucked into a very expensive RCBS pot
- WB, 2022-02-26, 16:08
-
That IS Appealing
- ~JM~, 2022-02-26, 15:25
-
JM, if you have bought a mould you
- Mark Conner, 2022-02-26, 17:16
-
I did pretty much the same thing last Saturday. Sized 400
- DinCA, 2022-02-26, 18:01