Reeder Custom Guns - here is one we did a while back

Gary Reeder
here is one we did a while back
Wednesday, March 02, 2022, 16:25

the Vaquero to start with
[image]
widened the groove down the top strap and fit the S&W sight to it.
[image]
tapered the top of the frame to fit the sides of the rear sight.
[image]
The small screw in front was just there to hold the sight in while we tapered the frame.
[image]
we cut the 2 gold bands on the barrel and the cylinders and soldered on the interchangeable blade front sight.
[image]
From there it went to the normal buffing and polishing before going to the bluing tank.
[image]

Reloading Day - Jim Taylor, 2022-03-01, 13:22
- 255 gr. RNFP & 6 gr. 700X - Jim Taylor, 2022-03-01, 13:42
  - I loaded up a large amount of 44 Mag loaded to hot - Gary Reeder, 2022-03-01, 14:16
    - I use 10gr of Unique for a lot of my 44 mag loads - Amede, 2022-03-01, 19:00
    - Those oughta be good! (nm) - Jim Taylor, 2022-03-01, 14:45
  - MILD & ACCURATE! (nm) - JT, 2022-03-01, 13:57
- .45 COLT RCBS HP - JT, 2022-03-01, 13:35
  - John, is that a converted Vaquero? Looks like some we do. (nm) - Gary Reeder, 2022-03-01, 14:04
    - MILT MORRISON INSTALLED S&W rear sight, - JT, 2022-03-01, 15:57
      - here is one we did a while back - Gary Reeder, 2022-03-02, 16:25
      - I like that! (nm) - Amede, 2022-03-01, 19:00
        It looks like a pre-war custom SAA! (nm) - WB, 2022-03-02, 13:05