Reeder Custom Guns - WHY WOULD YOU THINK YOU

JT
WHY WOULD YOU THINK YOU
Saturday, March 05, 2022, 10:21

WOULD HAVE TO DIS-ASSEMBLE TO MEASURE? PLUG/PIN GUAGES WORK JUST FINE W/O TAKING THE GUN APART.

Correct cast bullet size for 45 Colt? - Dave H., 2022-03-05, 06:07
- I Bought .454" Sized Mold - ~JM~, 2022-03-05, 12:36
- I have a set of these in Starrett that I've had for 30 some - Darryl T., 2022-03-05, 10:20
  - Try link again... - Darryl T., 2022-03-05, 10:25
- get a good set of pin gages - Randy Barnett, 2022-03-05, 09:16
- THERE IS NO "SIMPLE" IF YOU - JT, 2022-03-05, 07:24
  - I think your thoughts have a little validity - WB, 2022-03-05, 09:12
- Use bullets to check your throats - steve todd, 2022-03-05, 06:47
- (Edit) to add .452 SIZE, not .454 - Dave H., 2022-03-05, 06:30
  - Again you really need to check the throats - Amede, 2022-03-05, 07:40
    - On the subject of throats... - Dave H., 2022-03-05, 08:21
      - WHY WOULD YOU THINK YOU - JT, 2022-03-05, 10:21
        To hone them to uniform diameter (nm) - Dave H., 2022-03-05, 17:46
        YOU SAID YOU WERE INTERESTED - JT, 2022-03-05, 21:55
        Pin gauges would be best, but if you had to - Amede, 2022-03-05, 11:27

powered by my little forum