Reeder Custom Guns - 221 falcon

Ok…. Here goes..: Anybody currently hammering out any respectable .221 Falcon groups…. Holding very very good results with Gary’s 256 Falcon..
And the 310 GNR is a sweetheart…. Ordered my 221 Falcon, and will sit with a smile waiting for her to:arrive…. Hope she falls into place with my other .224 fodder….
FYI, sharing, The market being as miserable as it is for components, Natchez Shooters supply has been my best bet for powder and primers.. Not a hit every time I’m cruising their site, but better luck with them that Midway ect….. Anyway before I forget, Starline has been getting better with some sorts of inventory.. Actually grabbed 250 new 30/30 brass!! Without being rammed from behind….. Thanks in advance, to any who can share their bench secret…. Thanks again… Snake…..( From the edge of the earth.) U.P of Michigan

Post reply

Would give good performance, maybe even a little slower since the capacity to bore ratio is greater on the .224. Lots of Australian guys have wildcats on the .30-30 case for their Martini rifles, might hunt in that realm for a sleeper load.

Post reply

- No text -

Post reply

What is the best load you've found fir the 256? Im waiting on one right now.

Post reply

Right out of Gary’s kitchen, 35 grns 2230 with the 100 grain Nosler BT.. seems to digest any and all fodder i thro at her with great accuracy .. The 100 grn and 115 grain BT by Nosler are my two first choices.. Tom S

Post reply

Dave, failed to say I’m a shooting a 13” TC, and a 26” inch pipe as well..
Took 2 clean kills s this year, one shot each…. No tracking involved…. Plenty of ass for Michigan whitetail…. Tom S.

Post reply

221 falcon

I bet something in the range of H332,335, or 4895

Yep , 4895.H414 good place to start

256 load

AA2230

Times 2 ,,