“ I took a 1/2” x 20 bolt, cut the head off and turned half of the shank down to .396” and then cut a 10 degree taper down to about .280” and polished it. This tapered expander plug threads into a standard RCBS pistol flaring die body.“
-
40 - 50 Sharp's article
- Derek, 2022-09-26, 05:57
![[*]](themes/default/images/complete_thread.png "Open whole thread")
-
This was interesting for future use….
- WB, 2022-09-26, 09:04
- Did you read the hog hunt account with this pistol? - AmBraCol, 2022-09-26, 11:35
- That guy has way too much time on his hands (nm) - Gary Reeder, 2022-09-26, 10:06
-
This was interesting for future use….
- WB, 2022-09-26, 09:04