Have you ever wanted some .41 Mag. snake loads? I used them to very good effect on rats to maybe 30 ft. while bushhogging.
I simply cut off .30-30 brass at cylinder length. I loaded a stiff powder charge and inserted a tuft of dacron. Then I filled the case with shot and usually hot wax of hot glue a lid on it. This fire forms a case and works itself pretty well. Not trying to size or crimp the formed cases will preserve cases and greatly extend life. A simple card wad atop with hot glue is the best setup. (just don't glue pellets together - unless you WANT to) I played with gas checks crimped in place, turned this way and that, using different dies but it causes case mouth splits pretty early. Maybe annealing would help. I always just used a tuft of dacron for wadding between powder and shot, seemed easy and effective.
Once formed you only need a de-prime tool and priming method to reload. No need for dies.
-
From the deep forgotten bowels of the closet, what?
- WB, 2022-09-26, 18:17
- Ah, thought this was going to be a cut-down 400 GNR (nm) - Keith, 2022-09-29, 17:23
- It’s not another .401 project is it. (nm) - Brent Foy, 2022-09-27, 00:22
-
.375 SUPERMg (nm)
- JT, 2022-09-26, 20:53
-
Wonderful guess, but no, bigger. Plus it’s me! (nm)
- WB, 2022-09-26, 21:07
-
Here, from a different angle…
- WB, 2022-09-27, 03:24
- Now I'm REALLY curious... - AmBraCol, 2022-09-27, 07:24
-
SHOT LOADS! (nm)
- Jim Taylor, 2022-09-27, 06:53
-
Full cylinder (S&W) .41 Remington Mag. shotshells for vermin
- WB, 2022-09-27, 08:21
- Good to know! (nm) - Derek, 2022-09-27, 15:12
-
Full cylinder (S&W) .41 Remington Mag. shotshells for vermin
- WB, 2022-09-27, 08:21
-
Here, from a different angle…
- WB, 2022-09-27, 03:24
-
Wonderful guess, but no, bigger. Plus it’s me! (nm)
- WB, 2022-09-26, 21:07