Reeder Custom Guns - Here I am begging again. We build all our own grips

but to do so we need the escutcheons. This is the little two piece gizmo in the grip that the grip screw screws into. We have been looking everywhere for some but every distributor we have talked to, like Brownells or Midway, is out and has been for a good while. So if any of you have any I will pay top dollar for any that you have. Give me a buzz at 928-526-3313.

Post reply

I will drop them in the mail tomorrow. No charge Gary.

[image]

Post reply

from John Linebaugh. Let me know sometime what you need done to it other than rechambering it to 45 Long Colt.

Post reply

Using Slotted or Allen head 6-32 screws and tapping a brass tube to cut into the threaded ends. Some added knurling or some dremel cut surface area on the outside brass end would benefit the grip adhesion and keep it from spinning in the material. But time is money, if you can just find a source of ready made. IMO

Post reply

- No text -

Post reply

Here I am begging again. We build all our own grips

I have 2 complete and 2 partial

Thanks Jim. That will help.By the way, I got your 22 in

Kind of a pisser, but I'd figure a man could make a batch

I have a bunch. I’ll put them in tomorrow’s mail