is the frame of the gun. If you count the frame of the revolver out to the end of the housing it is 5.5".The ejector rod is 5.5" as the other half inch is inside the frame.
-
Ejector rods
- 475BISLEY480, 2023-05-22, 15:48
![[*]](themes/default/images/complete_thread.png "Open whole thread")
-
The ejector rod housing is exactly 5". The other half inch
- Gary Reeder, 2023-05-22, 16:09
-
Gotcha
- 475BISLEY480, 2023-05-22, 16:14
-
If you sent the gun in and it is yours then
- Gary Reeder, 2023-05-22, 16:35
- Aweaome - 475BISLEY480, 2023-05-22, 17:06
-
If you sent the gun in and it is yours then
- Gary Reeder, 2023-05-22, 16:35
-
Gotcha
- 475BISLEY480, 2023-05-22, 16:14
-
The ejector rod housing is exactly 5". The other half inch
- Gary Reeder, 2023-05-22, 16:09