Went out shooting yesterday...

John W
[subject]
Wednesday, September 13, 2023, 06:02 (1054 days ago)

I was "plinking" with a SW Performance Center Victory 22 LR autoloader and ran into something that surprised me.

I had a "backfire" of sorts. When I shot, I was sprayed in the face with some powder as it blasted through the action. This really took me by surprise. I never thought I'd experience something like this.

I was shooting some Winchester 22 LR rounds and noticed an awful lot of misfires. I would take the misfired round, rotate it to a fresh portion of the round and refire it. Again nothing. I recall in my youth misfires being rather rare. Now they are much more common.

The other issue that I have noticed is that of leading. I know that the WW are copper washed, but I do not believe that the wash is of any high quality. Again, I recall from the past that barrels did not foul up as easily. It seems that either the gun or the ammo is part of the reason for the gun to lead up.

After the "backfire", I disassembled the gun and thoroughly cleaned it. I noticed shards of lead coming out of the barrel. Again, in the past I could shoot a brick or two of 22 LR and not have this happen. Now it seems much more common.

Out of curiosity, does anyone else have issues like this?

I had several misfires shooting Winchester

Derek
[subject]
Wednesday, September 13, 2023, 06:29 (1054 days ago) @ John W

White box 22 lr a few weeks ago.

I have purchased .22 Ammo in quanties

Jim Taylor
[subject]
Wednesday, September 13, 2023, 07:00 (1054 days ago) @ Derek

from Federal, Winchester, Remington and Aguila. The Winchesters gave me the most misfires and Aguila gave me the least with Federal being about the same as Remington. I haven't had any leading problems.

I have a bunch of older ammo that is not copper washed or plated. I usually lube those with Lee Liquid Alox to keep them from leading.

I shoot multiple bricks of 22 LR target ammo

jthomson
[subject]
Wednesday, September 13, 2023, 08:51 (1054 days ago) @ John W

from CCI, Aguila, Norma, and Eley. None is copper washer all lead lubed with anything from oil with Norma to wax with Eley. All velocities are below 1100 FPS. no leading problems, and I have not experienced a misfire in 10,000 rounds. That being said I have not found a target version of Winchester so no experience with it.

powered by my little forum