Reeder Custom Guns - I’ve had great luck using AA#7 and Tight Group

WB
I’ve had great luck using AA#7 and Tight Group
Tuesday, January 09, 2024, 08:53

With cast bullets in 10mm. Mostly in a Glock 20 type platform with 6” broach cut rifled barrel. I’m shooting mostly 0.401” 215 gr. FNGC, but some 230 gr. too. The polygonal types need a much larger diameter cast bullet to work best, like 0.403”. If that will chamber reliably. That’s one reason they don’t recommend cast in that type of bore. FWIW

Kase is the 10mm Guru.

10 mm loads - FSimon, 2024-01-08, 20:25
- In my long slide 10mm I use a lot of Blue Dot. - Gary Reeder, 2024-01-09, 11:29
- What platform are you launching these 180s from? - steve todd, 2024-01-08, 21:56
  - response/10mm - FSimon, 2024-01-09, 05:51
    - response/10mm - FSimon, 2024-01-09, 16:16
    - 5.47" Glock aftermarket barrel , - Sean Harper, 2024-01-09, 07:35
      - I’ve had great luck using AA#7 and Tight Group - WB, 2024-01-09, 08:53
        I meant "Longshot" NOT Tite Group for 10mm (nm) - WB, 2024-01-09, 15:50
        Yep, AA7 and Longshot are top performers even - Sean Harper, 2024-01-09, 11:05
        Back many moons ago Kase and I were real big in the 10mm - Gary Reeder, 2024-01-09, 11:35