who says he can do it. We used to do it when our shop was in Florida but ran into so many differences in wall thickness, especially the foreign guns. Also a lot of guns that had been used with steel shot tended to have minor bulges in the barrel walls. Stay with Briley, Carlson or Midwest. Measure the thickness of your barrel walls before you send your gun out as some real thin walls take a specialty choke installer.
-
shotgun question
- Brian T, 2024-11-28, 17:01
![[*]](themes/default/images/complete_thread.png "Open whole thread")
- Go with a shotgun choke installer and not a gunsmith - Gary Reeder, 2024-11-29, 10:48
- It typically costs about $125-150 to have that done - WB, 2024-11-28, 20:35
-
Briley inc can usually do their thinwalls (nm)
- jthomson, 2024-11-28, 18:44
-
I have a 870 with Colonial thin wall chokes
- WB, 2024-11-29, 12:05
- thanks to all for the info!!! (nm) - Brian T, 2024-11-29, 18:39
-
I have a 870 with Colonial thin wall chokes
- WB, 2024-11-29, 12:05