Reeder Custom Guns - I'm with Jim

AlanT
I'm with Jim
Saturday, June 21, 2025, 14:31

There was no factory brass or ammo when I started playing with the 475 Linebaugh.

I still make my brass from Winchester .45-70

[image]

[image]

Here is my most recent batch of brass that needs to be fireformed

[image]

Ran Across Something I Had Never Seen - Jim Taylor, 2025-06-20, 19:03
- I have an old box of 400 gr. .475 LB Hornady - WB, 2025-06-21, 09:21
  - actually, the 500 came first - AlanT, 2025-06-21, 14:43
    - By golly your right. I didn't know Linebaugh, only through - WB, 2025-06-21, 16:50
  - My Home-Made .475 Linebaugh Ammo - Jim Taylor, 2025-06-21, 11:01
    - I'm with Jim - AlanT, 2025-06-21, 14:31
    - So you didn't have to trim rims to clear the pawl gear? - WB, 2025-06-21, 13:05
      - Yes. The reason for the smaller rimmed cartridges - Jim Taylor, 2025-06-21, 13:41
- The original .480 Ruger designation - plowboysghost, 2025-06-21, 06:28

powered by my little forum