Reeder Custom Guns - I made 1 case from 30-06 cut to the 45 Win Mag length.

Sean Harper
I made 1 case from 30-06 cut to the 45 Win Mag length.
Tuesday, June 02, 2026, 07:54

Looks good ,it fit the mag and would chamber from the mag. Also I could get the cartridge to chamber and extract when running the slide by hand , so I will make a few with 231- 6.0gr of powder and see if they run the glock ok.

Sean

WB's snake story reminded me of 45 ACP snake loads - Sean Harper, 2026-05-29, 07:13
- Think cut off '06 brass might work? (nm) - WB, 2026-05-29, 20:04
  - I made 1 case from 30-06 cut to the 45 Win Mag length. - Sean Harper, 2026-06-02, 07:54
  - Not sure about the extractor groove angle, I will look. (nm) - Sean Harper, 2026-06-01, 04:36
  - If you could get some of those capsules of #9 shot - colleen reeder, 2026-05-30, 21:01