Reeder Custom Guns - I finally jumped on some .416/500 NE brass

At $2 each it’s so much more economical than .500 NE brass. It would be easier to make .470 from it, no trimming. It’s 3.25” long and .500 is 3”.

The brass is very tough and should last a very long time anyway.

I bought some 10mm (10 and 9x25 Dillon) and .204 Ruger (.204 and .240 Raptor) brass from him too.

[image]

Post reply

- No text -

Post reply

Stock or once fired. Lots of guys with .416/500 NE guns don’t reload. So brass might be $2 a round or less. The .416/500 is just the .470, .475/476, or .450 NE necked down.you can reverse that or fully expand and trim to .500 NE. I have one of Gary’s .500 Encore barrels that I need some working brass.

When looking at deals don’t forget to factor shipping. I won (20) pcs. for $25. But shipping was $15, so $2 each for (20).

Post reply

- No text -

Post reply

I finally jumped on some .416/500 NE brass

Where do you get the nitro brass? That’s a great price

Keep your feelers out on GB. You can often find new old

Great, thanks !