Reeder Custom Guns - you don't need 40. The 405 brass is already 40

Gary Reeder
you don't need 40. The 405 brass is already 40
Friday, December 29, 2017, 20:48

you need some 375 sizer die, it doesn't have to be 378 GNR. You need some 338 die and then a 30 caliber die. The final die is the 280 die which is 7mm. And I don't sell any brass or loaded ammo. You might check with Colorado Custom Cartridges. They load the 280, so they may also sell sized brass.

280 GNR - Grover Sr, 2017-12-29, 19:41
- you only have to do it once but it takes 3 steps - Gary Reeder, 2017-12-29, 20:01
  - Do you sell brass already sized? - Grover Sr, 2017-12-29, 20:21
    - you don't need 40. The 405 brass is already 40 - Gary Reeder, 2017-12-29, 20:48
    - I guess I should have just said - Grover Sr, 2017-12-29, 20:43
      - .405 is smaller than the 06' case body - WB, 2017-12-30, 09:17
        Thanks WB I have 356 GNR dies - Grover Sr, 2017-12-30, 12:25
        The .356 GNR is on the .41 Mag. not .44 - WB, 2017-12-30, 09:23
  - Should he anneal the brass first, if virgin brass? (nm) - O' Gary, 2017-12-29, 20:03
    - Hornady 405 brass has already been annealed (nm) - Gary Reeder, 2017-12-29, 20:17