Reeder Custom Guns - 25-20 see below

Gary Reeder
25-20 see below
Thursday, February 08, 2018, 12:55

the 25-20 on the left,
251 Falcon on the right,
but the reamer was made off specs. I asked for a .175 length neck. We got a .086.
So the reamer has been sent back and will be re-cut to a .175 length neck or somewhere in that area.
So the neck will be about double what is shown in the pic. Even with the longer neck the total case capacity will be considerably more than the parent 25-20 case.
[image]

The 251 Falcon will be another build... - Huey, 2018-02-08, 11:45
- What is the 251 falcon parent case (nm) - Blake, 2018-02-08, 12:48
  - 25-20 see below - Gary Reeder, 2018-02-08, 12:55
    - Can the old Marlin 94 in 25-20 be rechambered to - Brent Foy, 2018-02-08, 13:09
      - that would work fine. The pressure curve is a soft one - Gary Reeder, 2018-02-08, 13:28
- That does sound like a lot of fun. (nm) - Brent Foy, 2018-02-08, 12:02
  - My present 250 GNR has a 1 in 14" twist (I think)... - Huey, 2018-02-08, 12:15
    - the current gun we are working on has a 10 twist barrel and - Gary Reeder, 2018-02-08, 12:42
    - I shot my first deer with a 25-20, and most - Brent Foy, 2018-02-08, 12:39