Reeder Custom Guns - Always cut the cheap part, LEE handles

WB
Always cut the cheap part, LEE handles
Friday, February 09, 2018, 18:08

The handles are designed for the LEE 6-cavity moulds. You end up with three handles on the LEE 6-cavity mould actually, one extra is a handle to break the sprue plate loose.

But the long dual handle LEE's are less than $20 and can be grinded a bit, or maybe the hole elongated, for mounting to single, dual, three, or four cavity moulds of other brands. It is a very handy cost savings trick.

NEI mold handles? - bigboar, 2018-02-09, 08:46
- I have ground the Lee 6 cav handles down to fit just fine (nm) - Sean Harper, 2018-02-09, 13:56
  - I have no means to do that what do you suggest? (nm) - bigboar, 2018-02-09, 17:41
  - They are so inexpensive I cut them to fit everything! (nm) - WB, 2018-02-09, 14:08
    - You cut them, the mold or the lee handles? (nm) - bigboar, 2018-02-09, 17:39
      - Always cut the cheap part, LEE handles - WB, 2018-02-09, 18:08
      - grind down the flat that goes in the mold side slots (nm) - Gary Reeder, 2018-02-09, 17:56
- RCBS fit them (nm) - Curt, 2018-02-09, 09:35