I didn't do it, but the transfer bar has a U-notch in the top that is the same size as the firing pin. If the cylinder pin is not 100% pushing out on the transfer bar it can hang a little bit rising up over the firing pin, feels notchy. Not all the time.
I found some stock parts and wanted to put it back original. It sounds like these BH parts are the correct spec. I suspect the smaller frame late model FT stuff is a bit different.
-
I have a large frame Vaquero that I'd like to try
- WB, 2018-02-24, 10:40
![[*]](themes/default/images/complete_thread.png "Open whole thread")
-
what transfer bar are you using now? There is only one
- Gary Reeder, 2018-02-24, 11:43
-
It seems to be the standard, but modified
- WB, 2018-02-24, 12:58
- I have seen several guns come in with that - Gary Reeder, 2018-02-24, 15:48
-
It seems to be the standard, but modified
- WB, 2018-02-24, 12:58
-
what transfer bar are you using now? There is only one
- Gary Reeder, 2018-02-24, 11:43