Gotta be that time of year again.

Mark Conner
[subject]
Friday, March 23, 2018, 11:55 (3092 days ago)

About once a year I get a little hankering to shoot a few 265 gr. LBT-WFN-PB bullets out of the 455 GNR. This bullet has shot ok but never exceptionally well, just something different to play with once in a while.
[image]
Here are a couple targets, both shot at 30 yds., sitting with forearms resting on my knees. About as good as I have ever made this bullet shoot. First target with the HS-6 load and a plain base bullet went into 1 5/8". The second target was with its gas checked cousin of the same weight and IMR-4227. Into an 1 7/8.
[image][image]
About 2 months ago I received a call from Glen Fryxell saying a good friend of his had recently died and he (Glen) was helping with some of the estate. In some of the things was an older Lyman 4 cavity 454424 mould. Of all the 45 cal. moulds I have, I have never had a 424. That was taken care of as quick as I could get to Glen's house. In the last 2 months of having this mould I have probably shot 1,200 of these bullets in the 455 GNR, I will never be without one again.

The 265 gr. LBT-WFN on the left with the 260 gr. 454424 on the right.
[image]

WOUld that be bore riding vs driving band styles?

WB
[subject]
Friday, March 23, 2018, 12:08 (3092 days ago) @ Mark Conner

They didn't mess with bore lapping, and all sorts of throating back in the day, did they?! Those old SWC designs just shoot good and are hard to best.

At least extended bearing surface.

Mark Conner
[subject]
Friday, March 23, 2018, 13:01 (3092 days ago) @ WB

- No text -

powered by my little forum