Reeder Custom Guns - Should be sized to the chamber and should

Amede
Should be sized to the chamber and should
Friday, May 11, 2018, 20:20

only have to neck size from there. No reason for full length. If you only have a full length and no neck sizer, just run the die all the way down then back off bout half a turn.

Sizing question - Grover Sr, 2018-05-11, 17:50
- For the most part yes. With TC's - WB, 2018-05-11, 20:26
- As a hunter, always get in the habit of full - Gary Reeder, 2018-05-11, 20:24
- Should be sized to the chamber and should - Amede, 2018-05-11, 20:20
  - I disagree. If you don't full length your brass, you get a - Gary Reeder, 2018-05-11, 20:32
    - I SIZE EVERYTHING INCLUDING BRAND NEW BRASS (nm) - JT, 2018-05-12, 22:22
    - Thanks, now I know! (nm) - Grover Sr, 2018-05-11, 20:35
      - Grover, find your own road to travel. My - Gary Reeder, 2018-05-11, 20:51
        I will, just need to start loading and - Grover Sr, 2018-05-12, 06:20
    - I hear that. Just that is the way I always did my 30 and 357 - Amede, 2018-05-11, 20:35
      - The old Herrett cartridges were great cartridges, BUT - Gary Reeder, 2018-05-11, 20:49
        The 2 that drove me crazy was 223 and 35 Rem - Amede, 2018-05-12, 07:05
        My first Contender was a Super 14, 30 Herrett. - Mike Casselton, 2018-05-12, 06:11