Reeder Custom Guns - Also, Weatherby cartridges are

Abin Sur
Also, Weatherby cartridges are
Saturday, June 02, 2018, 12:22

standardized with SAAMI. Therefore all reamers should have the correct throat or freebore length. You should only have a problem if you or someone else specifies a reamer with a different throat dimension and order said reamer that way.

post - Rigby, 2018-05-31, 22:42
- yes, the original post caused so much static that - Gary Reeder, 2018-06-01, 11:55
- I'm working up some loads this weekend - WB, 2018-06-01, 06:54
  - My Rigby story, - Darryl T., 2018-06-01, 07:53
    - It's difficult to find those Encore tubes! - WB, 2018-06-01, 09:09
      - The Weatherby runs at a much higher pressure. (nm) - IC, 2018-06-01, 13:03
        Yeah! The throat is about 1/2" deeper to the rifling too - WB, 2018-06-01, 13:27
        Called "freebore" (nm) - IC, 2018-06-01, 13:33
        Called freebore (nm) - IC, 2018-06-01, 13:31
        You knew. Can you imagine a custom rifle - WB, 2018-06-01, 13:47
        CEB bullets are great bullets with - Abin Sur, 2018-06-02, 12:18
        Also, Weatherby cartridges are - Abin Sur, 2018-06-02, 12:22
        Think I'll pass. (nm) - IC, 2018-06-01, 19:29
        I have read that same thing but it has never - Gary Reeder, 2018-06-01, 15:40
        but even back then we were doing our Maxi Throat, and like - Gary Reeder, 2018-06-01, 16:08
        Probably links back to the 50's-60's. - WB, 2018-06-01, 17:54